國米~魂 發表於 2005-2-26 23:42:30

底板認唔到HD , window入面認到

點搞?
2the max 4PGM2i

copy野入去慢


my case is
i have a SATA 160G matrox
then second master--CRW
second slave --ATA 160G matrox

底板認到
primary master--SATA 160G matrox
secondary master --- CDRW

認唔到secondary slave--- ATA 160G matrox

杰少仔 發表於 2005-2-27 12:15:22

my case is
i have a SATA 160G matrox
then second master--CRW
second slave --ATA 160G matrox

首先....SATA 係冇分master/slave，係不用set jumper
而你認唔到secondary slave--- ATA 160G matrox

可能係你set錯左Jumper
你一係將隻Maxtor 插去primary master (你應該有兩個IDE吧)

國米~魂 發表於 2005-2-28 08:50:10

Originally posted by 杰少仔 at 2005-2-27 12:15 PM:


my case is
i have a SATA 160G matrox
then second master--CRW
second slave --ATA 160G matrox

首先....SATA 係冇分master/slave，係不用set jumper
而你認唔到secondary slave--- ATA 160G matrox

可能係你set錯左Jumper<-- i set jor cable select
你一係將隻Maxtor 插去primary master (你應該有兩個IDE吧)<-- this has problem



睇menu 就話 SATA mode --- set enahnced mode will not disable IDE1 or IDE 2
the mode-- set for primary-- it will disbale IDE 1
set for secondary--- it will disbale IDE2
i now set jor for primary


i also tried enhanced mode
但最出果版都係show (有跳下跳下果版)
IDE 0--M
--------S
IDE 1---M
---------S

even i set enhanced mode and 將隻Maxtor 插去primary master
it will load the emppt HD as start

國米~魂 發表於 2005-2-28 11:04:50

did nothing but ok now.....

杰少仔 發表於 2005-2-28 12:23:25

Originally posted by 國米~魂 at 2005-2-28 11:04 AM:
did nothing but ok now.....
........................
頁: [1]
查看完整版本: 底板認唔到HD , window入面認到